SP MDT Tool :(Latest version)

📥 Download SP MDT Tool for Windows (All Versions)
SP MDT Tool (Smart Phone Multiport Download Tool) is a compact Windows utility that allows you to flash Stock ROMs (firmware) on MediaTek (MTK) powered smartphones and tablets. It is especially useful for upgrading, downgrading, or restoring devices stuck on boot logo or bricked after a failed software operation.

⚙️ Key Features:
Flash Scatter-based Stock ROMs on MTK Devices

Support for Firmware Upgrade / Format + Download

Compatible with Secure and Non-Secure Boot Devices

Inbuilt Memory Test & Nand Flash Tool Options

Works with Both Smartphones and Tablets

📥 Download SP MDT Tool (v5 & v6) for Windows – All Versions
SP MDT Tool (Smart Phone Multiport Download Tool) is a powerful flashing utility for MediaTek (MTK) powered smartphones and tablets. It allows you to install stock firmware, remove FRP locks, and recover bricked devices using scatter or XML-based flash files—depending on the tool version.

🧩 Version Comparison:
🔹 SP MDT Tool v5
Supports Scatter-based firmware (.txt)

Allows you to flash ROMs, upgrade/downgrade firmware, or unbrick MTK devices

Helps in removing Factory Reset Protection (FRP) on supported models

🔗 [Download SP MDT Tool v5]

🔸 SP MDT Tool v6
Supports XML-based firmware (.xml)

Designed for newer MTK devices that use XML firmware formats

Also supports FRP removal and full system flashing

🔗 [Download SP MDT Tool v6]

⚠️ Recommendation:
We always recommend using the latest version of SP MDT Tool for better device compatibility and stability.

🛠️ Step-by-Step Guide:
Download & Extract Tool
Download the latest SP MDT Tool and extract it on your computer.

Extract Stock ROM
Extract the firmware (Stock ROM) of your device on the PC.

Install MTK USB Drivers
Install the correct MediaTek USB Drivers to ensure proper device detection.

Launch SP MDT Tool
Open the folder and run SmartPhoneMultiPortDownloadTool.exe.

Load Scatter File
Click on the “Load Scatter File” option and locate the scatter.txt file from the extracted firmware.

Start Flashing
Once the firmware is loaded, click on Start All to begin the flashing process.

Connect Your Device
Power off the device completely, then connect it to your PC via USB cable. The tool will automatically detect and begin flashing.

✅ Done!
Once the process completes, a green OK message will appear. You can now safely disconnect and reboot your device.

📖 Readme Once
⚠️ Recommend:
We do not recommend flashing the preloader.bin file using the SP MDT Tool, as it may brick your device.
👉 Always untick the preloader.bin option before starting the flashing process.

⚠️ Caution:
Flashing firmware will erase all user data from the device.
✅ We strongly recommend taking a full backup of your important data before using the tool.

🏷️ Credits:
SP MultiPort Download Tool is developed and distributed by MediaTek Inc.
Full credit goes to them for providing this tool free of charge to the community.